Audi A3 8P Retrofit
My own car: Audi A3 8P MY2011 Facelift 1.2TFSI Manual Transmision
Hill Hold Control (HHC) is an electronic mechanism that holds the brake until the clutch is at the friction point, making it easier to start up hills from a stop in manual transmission automobiles.
Tire pressure monitoring system (TPMS) is a system designed to monitor and report real-time tire-pressure information to the driver, either via a pictogram display or a simple low-pressure warning light.
The cruise control system (CCS) enables you to maintain a constant speed from 30 km/h upwards, and the system is overridden as soon as you press the clutch or brake.
Multifunction Steering Wheel(MFSW) Scroll wheels and buttons are used to set volume levels or page through menus, change radio stations, and voice control navigation.
DIY Airbag Cable for MFSW Audi A3 8P. Just add 3 new wires. It is easy and safe. You don't have to modify any airbag wiring at all.
The driver information system (DIS) brings together different information items in the centre of the cockpit, and the DIS controls comprise two menu selection buttons and a reset button on the windscreen wiper lever to the right of the steering wheel.
There are 2 types. Type 1- when you push the lever for high beam, the lever it stays there. Type 2- when you push the lever for high beam, the lever it turns back. Type 1 (8P0 953 513 A, 1K0 953 513 A) and Type 2 (8P0 953 513 E, 1K0 953 513 E).
Let me show you how to replace or repair the Airbag Cover Emblem Logo Badge for any Audi. You can replace the cover or the logo using new one. It is a 30 minutes job.
DIY. How to install android DVD navigation. If you are looking for a fully featured car DVD to replace your vehicles' OEM radio while still retain the original look of your vehicles' interior, then this is your best choice.
Like an air bag to a seat belt, a rear-view camera system isn't a replacement for your vehicle's mirrors, it's a complement — a powerful tool for driving safely and parallel parking like a pro. Install it in the rear of Audi A3 8P.
DIY. How to remove door panel trim on Audi A3 8P 2004-2012. No matter if you do it for cleaning, replacing or upgrading, you can disassemble it in 10 minutes in your own backyard. All you need is a pry tool, torx T25 and T20.
DIY How to replace rear brake discs and pads, using OEM parts. The best brakes are the ones that do their job so unobtrusively you rarely even have to think of them. For this, I trust german engineers from Audi. They know better, so I trust OEM brakes.
Please note that this is only a guide and that I take no responsibility for any damage/problems. © Copyright 2019 Audi A3 8P Retrofit - All Rights Reserved
Share this page